HomeDive ShopGear service

DIVE GEAR SERVICE · ZANCLUS DIVE SHOP

Well-kept gear, calmer dives.

Regulators, BCDs, cylinders and dive computers checked and serviced by the Zanclus team before your next dive.

Gear
Regulators, BCDs, cylinders, computers
Time
From the same day
Location
Waisai, Raja Ampat

SERVICES

Choose a service for your gear.

Starting prices; the final cost depends on the gear and the parts replaced.

  • Regulator service

    Strip, clean and fit a service kit to the first and second stage, then set the pressure and leak test.

    Turnaround: 2 to 3 days

    FromIDR 650,000/ set

  • Octopus service

    The spare second stage is cleaned, O-rings and diaphragm replaced where needed, then tested.

    Turnaround: 1 to 2 days

    FromIDR 250,000/ unit

  • BCD service

    Inflator, dump valves and bladder checked and cleaned, then an overnight leak test.

    Turnaround: 1 to 2 days

    FromIDR 300,000/ unit

  • Visual cylinder inspection

    The cylinder is inspected inside and out, the valve cleaned and the O-ring replaced.

    Turnaround: 1 day

    FromIDR 150,000/ cylinder

  • Dive computer battery change

    Battery and O-ring replaced, then the screen and sensors checked. Battery to suit the model.

    Turnaround: Same day

    FromIDR 150,000/ unit

  • Small repairs

    Torn wetsuits, mask and fin straps, mouthpieces, hoses or O-rings. Final cost depends on the parts.

    Turnaround: Depends on the job

    FromIDR 50,000

Prices in rupiah are starting prices and may change. The final estimate follows the gear check.

Need new gear or a rental?See the Dive Shop catalog

HOW IT WORKS

Four easy steps.

From dropping off your gear to ready to dive again.

  1. Send a message

    Fill in the form on this page. The team replies on WhatsApp to arrange the drop-off.

  2. Gear check

    The team inspects your gear and gives a cost and time estimate before starting.

  3. Service

    The gear is stripped, cleaned, worn parts replaced, then put back together.

  4. Test & collect

    Your gear is tested before handover, with a note of the work done.

SERVICE QUESTIONS

Questions about servicing.

Service intervals, gear brands and parts.

How often does a regulator need a service?

Usually once a year or as the manufacturer recommends, and sooner with heavy use or long storage. The team can help check when it was last serviced.

Which brands can you service?

Write the brand and model of your gear in the form. The team checks that service kits and parts are available before you drop it off.

Do the prices include parts?

Prices are starting prices. Parts outside the standard kit are charged separately and always confirmed first.

Can the service be done before my trip?

Write your trip date in the notes. The team adjusts the queue where possible and keeps you posted on WhatsApp.